Manticore supports basic transactions for deleting and inserting data into real-time and percolate tables, except when attempting to write to a distributed table which includes a real-time or percolate table. Each change to a table is first saved in an internal changeset and then actually committed to the table. By default, each command is wrapped in an individual automatic transaction, making it transparent: you simply 'insert' something and can see the inserted result after it completes, without worrying about transactions. However, this behavior can be explicitly managed by starting and committing transactions manually.

Transactions are supported for the following commands:

• INSERT
• REPLACE
• DELETE

Transactions are not supported for:

• UPDATE (which is different from REPLACE, as it performs an in-place attribute update)
• ALTER - for updating table schema
• TRUNCATE - for emptying a real-time table
• ATTACH - for attaching a plain table to a real-time table
• CREATE - for creating a table
• DROP - for deleting a table

Please note that transactions in Manticore do not aim to provide isolation. The purpose of transactions in Manticore is to allow you to accumulate multiple writes and execute them all at once upon commit, or to roll them all back if necessary. Transactions are integrated with binary log for durability and consistency.

SET AUTOCOMMIT = {0 | 1}

SET AUTOCOMMIT controls the autocommit mode in the active session. AUTOCOMMIT is set to 1 by default. With the default setting, you don't have to worry about transactions, as every statement that makes any changes to any table is implicitly wrapped in a separate transaction. Setting it to 0 allows you to manage transactions manually, meaning they will not be visible until you explicitly commit them.

Transactions are limited to a single real-time or percolate table and are also limited in size. They are atomic, consistent, overly isolated, and durable. Overly isolated means that the changes are not only invisible to concurrent transactions but even to the current session itself.

START TRANSACTION | BEGIN
COMMIT
ROLLBACK

The BEGIN statement (or its START TRANSACTION alias) forcibly commits any pending transaction, if present, and starts a new one.

The COMMIT statement commits the current transaction, making all its changes permanent.

The ROLLBACK statement rolls back the current transaction, canceling all its changes.

When using one of the /bulk JSON endpoints ( bulk insert, bulk replace, bulk delete ), you can force a batch of documents to be committed by adding an empty line after them.

insert into indexrt (id, content, title, channel_id, published) values (1, 'aa', 'blabla', 1, 10);
Query OK, 1 rows affected (0.00 sec)

select * from indexrt where id=1;
+------+------------+-----------+--------+
| id   | channel_id | published | title  |
+------+------------+-----------+--------+
|    1 |          1 |        10 | blabla |
+------+------------+-----------+--------+
1 row in set (0.00 sec)

The inserted value is immediately visible in the following 'select' statement.

set autocommit=0;
Query OK, 0 rows affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (3, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (4, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

select * from indexrt where id=3;
Empty set (0.01 sec)

select * from indexrt where id=4;
Empty set (0.00 sec)

In this case, changes are NOT automatically committed. As a result, the insertions are not visible, even in the same session, since they have not been committed. Also, despite the absence of a BEGIN statement, a transaction is implicitly started.

To make the changes visible, you need to commit the transaction:

commit;
Query OK, 0 rows affected (0.00 sec)

select * from indexrt where id=4;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    4 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.00 sec)

select * from indexrt where id=3;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    3 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.00 sec)

After the commit statement, the insertions are visible in the table.

By using BEGIN and COMMIT, you can define the bounds of a transaction explicitly, so there's no need to worry about autocommit in this case.

begin;
Query OK, 0 rows affected (0.00 sec)

insert into indexrt (id, content, title, channel_id, published) values (2, 'aa', 'bb', 1, 1);
Query OK, 1 row affected (0.00 sec)

select * from indexrt where id=2;
Empty set (0.01 sec)

commit;
Query OK, 0 rows affected (0.01 sec)

select * from indexrt where id=2;
+------+------------+-----------+-------+
| id   | channel_id | published | title |
+------+------------+-----------+-------+
|    2 |          1 |         1 | bb    |
+------+------------+-----------+-------+
1 row in set (0.01 sec)

Searching is a core feature of Manticore Search. You can:

• Perform full-text search and implement search result highlighting
• Perform k-nearest neighbor search
• Apply non-full-text filtering
• Use expressions for filtering
• Utilize various search options
• Employ multi-queries and sub-selects
• Conduct aggregations and faceting of search results
• And much more

SQL:

SELECT
    select_expr [, select_expr] ...
    [FROM tbl_name
        [{INNER | LEFT} JOIN tbl2_name]
        [WHERE where_condition]
        [GROUP BY {col_name | expr}, ... ]
        [HAVING where_condition]
        [ORDER BY {col_name | expr}
            [ASC | DESC], ... ]
    ]
    [LIMIT {[offset,] row_count | row_count OFFSET offset}]
    [OPTION option1[, option2] ...]

JSON:

POST /search
{   
    "table" : "table_name",
    "options":   
    {
      ...
    }
}